Improper installation, typically involving rough handling, accounts for 16% of premature bearing failures. The SKF imported bearing installation tool kit TMFT 36 is designed for rapid, precise bearing installation while minimising the risk of damage during mounting.

By appropriately combining impact rings and sleeves, installation forces can be effectively transmitted through the interference fit to the bearing ring, thereby minimising the risk of damage to the bearing raceways and rolling elements. The installation tool kit contains 36 impact rings, 3 impact sleeves and 1 non-rebound hammer, all housed in a portable tool case. Beyond bearing installation, the FMFT 36 can also be used for fitting bushings, seals and pulleys.

Thirty-six impact rings of varying sizes accommodate over 400 bearing models

Facilitates precise installation of bearings on shafts, housings, and blind bores

Impact rings make optimal contact with both inner and outer ring faces

Sleeves' smaller-diameter contact surfaces efficiently transmit and distribute installation forces

Impact rings and sleeves are manufactured from impact-resistant materials for extended service life

The impact ring and sleeve are connected via a snap-fit mechanism for enhanced stability and durability.

The impact ring is suitable for use under pressure.

Clear, legible size identification numbers are marked on the impact ring for easy selection.

The sleeve features a knurled surface for secure grip.

The non-rebound hammer incorporates a dual-sided nylon hammer head to prevent component damage.

The hammer's rubber handle facilitates comfortable handling.